Professional painting, priced clearly from the start.
Book a free site visit in Madurai or Coimbatore. We inspect, measure and specify the preparation, Royaltec materials, labour and handover in one itemised quote. Factory-direct materials keep comparable quality up to 40% below dealer pricing.
Managed painting: at least 1,000 sq ft of paintable walls and ceilings.
- Established 2012Madurai paint manufacturer
- Free site visitSurface and moisture-condition check
- 24-hour callbackWe call to confirm your visit
- Itemised quoteMaterials, labour and scope in writing
Choose the service your property needs
Every service starts with a free site visit. The written quote confirms the measured area, preparation, product system, labour and project-specific price.
Know what the square-foot rate means
Interior painting starts at ₹7.00/sq.ft and exterior painting starts at ₹11.60/sq.ft for the economical range. Rates use measured paintable surface area (not floor area) and include labour plus standard Royaltec materials on a sound prepared surface. The final quote follows the free site measurement. Our managed paint-and-painting service requires at least 1,000 sq ft of paintable walls and ceilings, not floor area.
Measured at the property
Walls, ceilings, openings and special surfaces are recorded separately.
Condition changes preparation
Putty, primer, cracks, loose paint and damp treatment are itemised when required.
Access is made visible
Height access, protection and other project constraints appear in the quote.
Final quote controls
The approved site-measured scope confirms the products, coats, labour and total price.
Interior repainting with the room kept intact
The camera, furniture and lighting remain fixed so the visible change stays focused on wall repair and paint.
The same facade after preparation and repainting
Treat the cause before restoring the finish
What an itemised painting quote should show
A comparable quote defines the wall, the work and the responsibilities instead of hiding everything behind one line.
Measurements
Paintable areas, openings, ceilings and special surfaces noted separately.
Wall condition
Peeling, chalking, cracks, stains and visible moisture indicators.
Preparation
Cleaning, scraping, sanding, filling and repairs included in the scope.
Coat counts
Planned coats for each stage of the agreed system.
Protection and labour
Masking, access, application and cleanup responsibilities.
Working sequence
The expected order of rooms or outside walls and drying checkpoints.
Exclusions
Work outside the scope and the approval process for new findings.
Six checkpoints from inspection to handover
Each stage creates a clear decision before the next stage starts.
1. Inspect
Review surfaces, symptoms, access and how the space is used.
2. Measure
Record paintable areas and surfaces that need separate treatment.
3. Specify
Define preparation, products, finish and planned coat counts.
4. Approve
Agree the written scope, sequence, exclusions and selected shades.
5. Execute
Protect the site, prepare surfaces and apply the documented system.
6. Hand over
Walk through the finish and record any agreed close-out points.
Controls that protect the finish and the home
Shade approval
Confirm the selected colour in the actual room or on the actual wall before rollout.
Surface checkpoints
Review preparation before primer and finish coats cover the surface.
Material traceability
Keep the named product and system visible in the approved scope.
Protected handover
Remove masking, collect work debris and inspect agreed surfaces together.
Painting services by location
Check current neighbourhood coverage and local guidance for your city.
Questions to settle before painting starts
Interior painting starts at ₹7.00/sq.ft and exterior painting starts at ₹11.60/sq.ft, both for the economical range. That covers labour and standard Royaltec materials on a sound, prepared surface. The final quote follows a free site measurement, because two houses of the same size rarely need the same preparation. Our managed paint-and-painting service requires at least 1,000 sq ft of paintable walls and ceilings, not floor area.
Yes. Yes. Our managed paint-and-painting service requires at least 1,000 sq ft of paintable walls and ceilings, not floor area. If you are unsure, request a scope-assessment callback before arranging a visit.
Because paint is bought by surface, not by floor space. The rate applies to measured paintable surface area, so walls, ceilings and openings are recorded separately. A room with high ceilings costs more to paint than a larger room with low ones, and a per-room price hides that.
Condition, mostly. Loose or chalking paint means scraping and extra primer. Fresh plaster may need alkali-resistant priming. Damp has to be traced and corrected before any coating goes on. Height access, heavy masking in an occupied home and a move to a higher product range also move the number, and each of those appears as its own line in the quote.
Yes, and there is no obligation to book work afterwards. We measure the surfaces, record the wall condition and send an itemised quote, usually within one working day of the visit.
Share the rooms or outside walls involved, visible cracks or damp areas, your preferred working window and any surfaces such as ceilings, grills or doors that may need separate attention.
Compare measured area, wall condition, preparation, named primer and finish products, coat counts, labour, masking, access, cleanup, exclusions and change approval, not only the final total.
They can be coordinated when the likely moisture source and required repair are understood first. Plumbing, terrace or structural work may need the appropriate trade before repainting.
The approved scope should name the proposed primer, putty and finish for each surface and state the planned coat count.
Request a site-measured, itemised quote
Tell us about the property, wall condition and work you want included.